Thermo-Tuff

温度传感器:高速且坚固耐用,适用于料仓和搅拌机

测量:

  • 分批温度

典型材料:

  • 沙子
  • 水泥
  • 混凝土
  • 沥青
  • 骨料

独特重要功能:

  • 坚固耐磨的设计,适用于研磨材料。
  • 可选择固定选项,方便安装。
  • 温度范围为 0℃ 至 80℃。

流程

料箱或筒仓

  • 可安装在料箱内或箱门下方的物料流中。

搅拌机

  • 可安装在搅拌机的底面或腹部。
  • 0310 Thermo-Tuff 安装环
  • 0320 Thermo-Tuff 加长安装套筒
Digital Technology
Digital technology provides precise, linear moisture measurement.
Advanced Digital Signal Processing
The sensor response may be adjusted remotely using the Hydro-Com software to minimise the effects of noise of the measured signal. Advanced Digital Signal Processing provides a clear signal with a rapid response.
Measurement Modes
Choice of measurement modes for optimising sensor performance in a variety of applications and material types (except Hydro-Probe).
Fully Temperature Compensated Measurement
The sensor internally adjusts for mechanical changes due to temperature fluctuations
Easy to Interface
Two analogue outputs and digital RS485 communications and configurable digital inputs / output make the sensor simple to integrate into a control system. Includes Modbus.
Fast Measurement
Measuring at 25 times per second, the sensor continuously detects changes in the moisture of the materials throughout processing.
Temperature Measurement
Temperature output is available to provide a readout of material temperature.
Accuracy of Measurement
All measurements can be calibrated to an accuracy of 0.2% for aggregates (0.1% in the mixer) and 0.5% for other materials.
Sensor Configuration
Sensors can be remotely configured using Hydro-Com diagnostic software or Hydro-View/Hydro-Hub. All readings and sensor parameters are available including the type of output and filtering characteristics.
Calibration
The sensor may be internally calibrated using Hydro-Com software, or the linear output may be calibrated within the control system or remotely by using the Hydronix Hydro-View/Hydro-Hub interfaces.
Simple Power Requirements
The sensor may be powered from a 15-30V dc supply. Multiple sensors may be driven from a single power source.
Modbus,用于控制系统
输入/输出连接
推荐的现场布线方式:
  • 六对双绞线(共 12 芯)屏蔽电缆,带 22 AWG、0.35mm2 的导体
  • 屏蔽:编织屏蔽层(最低 65% 的覆盖面积)加铝/聚酯薄膜
  • 推荐的电缆类型:Belden 8306, Alpha 6373
  • 电缆最大长度:100m,与其他重型设备供电电缆区分

咨询事宜 Thermo-Tuff

支持

请自助查看我们的技术资源。
如需 Hydronix 安装的进一步支持,请联系我们的友好支持团队。

资源

© 2024 Hydronix Ltd. Registered in England No. 01609365