倾斜，适合窄颈料箱
- 如果料箱颈部较小，请以向下的角度安装。
带式传送机
- 可安装在带式传送机上。
料箱下面
- 位于物料主流中的箱门下方。
料箱内部
- 可安装在料箱的侧面。
料箱颈部
- 可安装在料箱的颈部。
振动给料器
- 请联系我们的技术团队寻求建议。
宽料箱
- 可使用加长安装套筒进行安装以接近物料流的中心。
- 0023 Hydro-Probe – 卡圈（与 0024A 或 0024B 配合使用）
- 0024A Hydro-Probe – 法兰安装套筒（用于垂直安装传感器，需要 0023）
- 0024B Hydro-Probe – 不锈钢法兰安装套筒（用于垂直安装传感器，需要 0023）
- 0025 Hydro-Probe – 标准安装套筒
- 0026 Hydro-Probe – 加长安装套筒
- 0975A 4m 传感器电缆
- 0975AT 带网络终端的传感器电缆（4、10、25 和 50m）
- Digital Technology
- Digital technology provides precise, linear moisture measurement.
- Advanced Digital Signal Processing
- The sensor response may be adjusted remotely using the Hydro-Com software to minimise the effects of noise of the measured signal. Advanced Digital Signal Processing provides a clear signal with a rapid response.
- Measurement Modes
- Choice of measurement modes for optimising sensor performance in a variety of applications and material types (except Hydro-Probe).
- Fully Temperature Compensated Measurement
- The sensor internally adjusts for mechanical changes due to temperature fluctuations
- Easy to Interface
- Two analogue outputs and digital RS485 communications and configurable digital inputs / output make the sensor simple to integrate into a control system. Includes Modbus.
- Fast Measurement
- Measuring at 25 times per second, the sensor continuously detects changes in the moisture of the materials throughout processing.
- Temperature Measurement
- Temperature output is available to provide a readout of material temperature.
- Accuracy of Measurement
- All measurements can be calibrated to an accuracy of 0.2% for aggregates (0.1% in the mixer) and 0.5% for other materials.
- Sensor Configuration
- Sensors can be remotely configured using Hydro-Com diagnostic software or Hydro-View/Hydro-Hub. All readings and sensor parameters are available including the type of output and filtering characteristics.
- Calibration
- The sensor may be internally calibrated using Hydro-Com software, or the linear output may be calibrated within the control system or remotely by using the Hydronix Hydro-View/Hydro-Hub interfaces.
- Simple Power Requirements
- The sensor may be powered from a 15-30V dc supply. Multiple sensors may be driven from a single power source.
Modbus，用于控制系统
输入/输出连接
推荐的现场布线方式:
- 六对双绞线（共 12 芯）屏蔽电缆，带 22 AWG、0.35mm2 的导体
- 屏蔽：编织屏蔽层（最低 65% 的覆盖面积）加铝/聚酯薄膜
- 推荐的电缆类型：Belden 8306, Alpha 6373
- 电缆最大长度：100m，与其他重型设备供电电缆区分
